ファイル定義書 HotDocument 今井浩司

tg3.c

ファイル名ファイル名

tg3.c

ソースファイル情報ソースファイル情報

内容 行数 比率
コメント行数 344 10%
空行行数 629 18%
実行行数 2462 72%
合計行数 3435 100%

関数定義数関数定義数

内容 定義数
関数数 57

定義関数定義関数

No. 名称 属性 説明
1
StaticStatic pci_save_state static int pci_save_state - save the PCI configuration space of a device before suspending
2
StaticStatic pci_restore_state static int pci_restore_state - Restore the saved state of a PCI device
3
StaticStatic tg3_write_indirect_reg32 static void  
4
StaticStatic tw32_carefully static void  
5
StaticStatic tw32_mailbox2 static void  
6
StaticStatic tg3_write_mem static void  
7
StaticStatic tg3_read_mem static void  
8
StaticStatic tg3_disable_ints static void  
9
StaticStatic tg3_switch_clocks static void  
10
StaticStatic tg3_readphy static int  
11
StaticStatic tg3_writephy static int  
12
StaticStatic tg3_writedsp static int  
13
StaticStatic tg3_phy_set_wirespeed static void  
14
StaticStatic tg3_bmcr_reset static int  
15
StaticStatic tg3_wait_macro_done static int  
16
StaticStatic tg3_phy_write_and_check_testpat static int  
17
StaticStatic tg3_phy_reset_chanpat static int  
18
StaticStatic tg3_phy_reset_5703_4_5 static int  
19
StaticStatic tg3_phy_reset static int  
20
StaticStatic tg3_set_power_state_0 static void  
21
StaticStatic tg3_link_report static void  
22
StaticStatic tg3_setup_flow_control static void  
23
StaticStatic tg3_aux_stat_to_speed_duplex static void  
24
StaticStatic tg3_phy_copper_begin static int  
25
StaticStatic tg3_init_5401phy_dsp static int  
26
StaticStatic tg3_setup_copper_phy static int  
27
StaticStatic tg3_fiber_aneg_smachine static int  
28
StaticStatic tg3_setup_fiber_phy static int  
29
StaticStatic tg3_setup_phy static int  
30
StaticStatic tg3_stop_block static int  
31
StaticStatic tg3_abort_hw static int  
32
StaticStatic tg3_chip_reset static void  
33
StaticStatic tg3_stop_fw static void  
34
StaticStatic tg3_restart_fw static int  
35
StaticStatic tg3_halt static int  
36
StaticStatic __tg3_set_mac_addr static void  
37
StaticStatic tg3_set_bdinfo static void  
38
StaticStatic tg3_init_rings static void  
39
StaticStatic tg3_setup_hw static int  
40
StaticStatic tg3_nvram_init static void  
41
StaticStatic tg3_nvram_read_using_eeprom static int  
42
StaticStatic tg3_nvram_read static int  
43
StaticStatic tg3_phy_probe static int  
44
StaticStatic tg3_read_partno static void  
45
StaticStatic tg3_get_invariants static int  
46
StaticStatic tg3_get_device_address static int  
47
StaticStatic tg3_setup_dma static int  
48
StaticStatic tg3_init_link_config static void  
49
StaticStatic tg3_phy_string static const char *  
50
StaticStatic tg3_poll_link static void  
51
StaticStatic tg3_ack_irqs static void POLL - Wait for a frame
52
StaticStatic tg3_poll static int  
53
StaticStatic tg3_set_txd static void TRANSMIT - Transmit a frame
54
StaticStatic tg3_transmit static void  
55
StaticStatic tg3_disable static void DISABLE - Turn off ethernet interface
56
StaticStatic tg3_irq static void IRQ - Enable, Disable, or Force interrupts
57
StaticStatic tg3_probe static int PROBE - Look for an adapter, this routine's visible to the outside

See Also

目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー