via-velocity.c
内容 | 行数 | 比率 |
---|---|---|
コメント行数 | 484 | 25% |
空行行数 | 404 | 21% |
実行行数 | 1051 | 54% |
合計行数 | 1939 | 100% |
内容 | 定義数 |
---|---|
関数数 | 33 |
No. | 型 | 名称 | 属性 | 説明 |
---|---|---|---|---|
1 |
Static | velocity_set_int_opt | static void | velocity_set_int_opt - parser for integer options |
2 |
Static | velocity_set_bool_opt | static void | velocity_set_bool_opt - parser for boolean options |
3 |
Static | velocity_get_options | static void | velocity_get_options - set options on device |
4 |
Static | velocity_init_cam_filter | static void | velocity_init_cam_filter - initialise CAM |
5 |
Inline | velocity_give_many_rx_descs | static inline void | |
6 |
Static | velocity_rx_refill | static int | |
7 |
Static | velocity_poll | static int | POLL - Wait for a frame |
8 |
Static | velocity_transmit | static void | TRANSMIT - Transmit a frame |
9 |
Static | velocity_disable | static void | DISABLE - Turn off ethernet interface |
10 |
Static | velocity_irq | static void | IRQ - handle interrupts |
11 |
Static | velocity_probe | static int | PROBE - Look for an adapter, this routine's visible to the outside |
12 |
Static | velocity_init_info | static void | velocity_init_info - init private data |
13 |
Function | pci_resource_flags | unsigned long | |
14 |
Static | velocity_get_pci_info | static int | |
15 |
Static | velocity_print_link_status | static void | velocity_print_link_status - link status reporting |
16 |
Static | velocity_rx_reset | static void | velocity_rx_reset - handle a receive reset |
17 |
Static | velocity_init_registers | static void | velocity_init_registers - initialise MAC registers |
18 |
Static | velocity_soft_reset | static int | velocity_soft_reset - soft reset |
19 |
Static | velocity_init_rings | static int | velocity_init_rings - set up DMA rings |
20 |
Static | velocity_open | static int | |
21 |
Static | mii_init | static void | mii_init - set up MII |
22 |
Static | safe_disable_mii_autopoll | static void | safe_disable_mii_autopoll - autopoll off |
23 |
Static | enable_mii_autopoll | static void | enable_mii_autopoll - turn on autopolling |
24 |
Static | velocity_mii_read | static int | velocity_mii_read - read MII data |
25 |
Static | velocity_mii_write | static int | velocity_mii_write - write MII data |
26 |
Static | velocity_get_opt_media_mode | static u32 | velocity_get_opt_media_mode - get media selection |
27 |
Static | mii_set_auto_on | static void | mii_set_auto_on - autonegotiate on |
28 |
Static | set_mii_flow_control | static void | set_mii_flow_control - flow control setup |
29 |
Static | velocity_set_media_mode | static int | velocity_set_media_mode - set media mode |
30 |
Static | mii_check_media_mode | static u32 | mii_check_media_mode - check media state |
31 |
Static | check_connection_type | static u32 | |
32 |
Static | enable_flow_control_ability | static void | enable_flow_control_ability - flow control |
33 |
Function | pci_set_power_state | int | pci_set_power_state - Set the power state of a PCI device |
目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー